Roof and floor anomalous response of mine resistivity method

Roof and floor

As the exploitation level of coal seams increases in China, mine water inrush is becoming increasingly serious. Effectively

detecting the roof and floor anomalous bodies of mines in whole space has always been the focus and challenge of research

with the direct current (DC) resistivity method. Based on the finite element theory and the ANSYS finite element software,

the ANSYS parametric design language (APDL) of 600 m pole–dipole array A-MN or MN-B of the mine DC resistivity

method is given, and the floor model with a distance of 40 m from the abnormal body to the roadway and the roof and floor

model with a distance of 40 m, 30 m, 20 m, and 10 m from the abnormal body to the roadway are established, respectively.

According to the analysis of calculation error, the maximum relative average error is 2.18%, which shows the correctness of

the calculation of model. The calculation results of the above model are plotted, and then the anomalous response characteristics

of the roof and floor of the pole–dipole array in the whole-space are obtained by comparing the figures. According

to the anomalous response characteristics of roof and floor, it is conducive to accurately interpret the measured data.

anomalous response of mine resistivity method